How to Install TWRP Recovery on Samsung Galaxy Tab 3 8.0 [SM-T311/T315/T310]

Tools Requirements:-

1. Original USB cable.

2. Charging Your battery up 80%.

3. Samsung Galaxy Tab 3 8.0 Driver:- Click here to Download

Must Read:- How to Install ADB Drivers of any Android device with PdaNet  

4. Download TWRP Recovery File :- Click Here to Download 

5. Samsung ODIN V 3.07:- Click here to Download. 
Must Read:- Install Official Jelly Beam 4.1.2 in Samsung Galaxy Tab-3 T211
Instruction:- This TWRP Recovery File is works only Samsung Galaxy Tab-3 8.0 (SM-T311/T315/T310) so don't tray to other Samsung Devices.

Installation Process:-

1. Enable USB Debugging in your device.

2. Switch OFF your Samsung Galaxy Tab 3 8.0

3. Open the device to Download mode. (To do this Press and hold  volume Down + Home button

    Download screen should appear.)

4. After 2 second WARNING! Screen appears. Press the 'Volume UP' button to enter Download 

    Mode. Now connect your Samsung Galaxy Tab 3 8.0 in your PC through USB Cable.  

5. Run the ODIN application on the desktop. When the device is connected successfully, the ID: COM

    boxof ODIN screen will turn Blue or Yellow with the COM port number. & 'Added' should appear in

    the message box in Odin.(If not, then install  Samsung Galaxy Tab-3 USB driver successfully then 

    check it again.) (Other wise don't apply next step)

6. Now Click on "PDA" and Select ".tar.md5"

7. Tick only Auto Reboot and F.Reset Time check boxes are selected in ODIN Screen.
    Tick Re-Partition option, only if the .PIT file is selected in the step 6.(If .PIT file select then tick
    Re-Partition other wise don't Tick Re-Partition box.

Note:- Verify everything suggested in Step 6 and Step 7 is done correctly.
8. Now Click the Start Button from the ODIN application and wait for some time to flash the file.
9. Wait Until Process Finishes. As Soon As Process Done, You will See That The ID:COM Section is
    Turned Green With The Message “Pass”.
10. After Getting “Pass” Message, Disconnect Your Phone From The PC.
11. Now your  Samsung Galaxy Tab 3 8.0 successfully Install TWRP Recovery.
Enjoy your Samsung Galaxy Tab 3 8.0 successfully Install TWRP Recovery 

Share this links with your friends
Don't used this process to other devices other wise your mobile is damage.
Note:- I am not responsible if you make any mistake and damage or any other problem your devise.