How to Update Android 4.2.2 XXUANA3 Jelly Bean Official Firmware on Galaxy S Duos 2 S7582.

Tools Requirements:-
1.       Use Original USB cable.
2.      Charging your devices battery up to 80%.
3.      Samsung Galaxy S Duos 2 Driver: - Click here to Download
4.      Download Official 4.2.2 Jelly Bean: - Click Here to Download 
5.      Samsung ODIN V 3.07:- Click here to Download.
Instruction: - This Official 4.2.2 Jelly Bean is works only Samsung Galaxy S Duos 2 S7582 so doesn’t try to other Samsung Devices.

Installation Process:-
1.       Enable USB Debugging in your device.
2.      Switch OFF your Samsung Galaxy S Duos 2 S7582
3.   Open the device to download mode. (To do this Press and hold volume down + power button + Home button Download screen should appear.)
4. After 2 second WARNING! Screen appears. Press the 'Volume UP' button to enter Download Mode. Now connect your Samsung Galaxy S Duos 2 S7582 in your PC through USB Cable.
5.      Run the ODIN application on the desktop. When the device is connected successfully, the ID: COM boxof ODIN screen will turn Blue or Yellow with the COM port number. & 'Added' should appear in the message box in Odin. (If not, then install  Samsung Galaxy Tab-3 USB drivers successfully then check it again.) (Other wise don't apply next step)
 
6.      Now from the ODIN Application screen
A.     Click the PDA button and select .tar or .md5
B.  Click on ‘Phone’ then choose file with ‘MODEM’ in its name. If the file doesn't exist, ignore this step.
C.     Click on ‘CSC’ then choose file with ‘CSC’ in its name. If this file doesn't exist, ignore this step.
D.    Click on ‘PIT’ then choose file with .pit file. However if this file doesn't exist, then ignore this one.
Note: Ignore the last three steps (B, C and D) in case such files are not found.
7.      Tick only Auto Reboot and F.Reset Time check boxes are selected in ODIN Screen.
8.   Tick Re-Partition option, only if the .PIT file is selected in the step 6. (If .PIT file select then tick Re-Partition otherwise don't Tick Re-Partition box.
9.     Note: - Verify everything suggested in Step 6 and Step 7 is done correctly.
10.  Now Click the Start Button from the ODIN application and wait for some time to flash the file.
11.   Wait Until Process Finishes. As Soon as Process Done, You will See That The ID: COM Section is Turned Green With The Message “Pass”.
12.  After Getting “Pass” Message, Disconnect Your Phone From The PC.
13.  Now your Samsung Galaxy S Duos 2 S7582 successfully Update Android 4.2.2
Enjoy your Samsung Galaxy S Duos 2 S7582 successfully Update Android 4.2.2
Share this links with your friends
Don't use this process to other devices otherwise your mobile is damage.
Note: - I am not responsible if you make any mistake and damage or any other problem your devise.

0 Response to "How to Update Android 4.2.2 XXUANA3 Jelly Bean Official Firmware on Galaxy S Duos 2 S7582."

Post a Comment