How To Root Sprint Galaxy Note 3 N900P and Install TWRP Recovery

Tools Requirements:-

1. Original USB cable.

2. Charging Your battery up 80%.

3. Samsung Galaxy Note 3 Sprint Driver:- Click Here to Download 

Must Read:- How to Install ADB Drivers of any Android device with PdaNet.
4. ODIN 3.09 :- Click Here to Download 

5. CF-Auto Root:- Click Here to Download

6. TWRP Recovery :- Click Here to Download

Instruction:- This Rooting Process is works only Samsung Galaxy Note 3 N900P so don't tray to other Samsung Devices.

Rooting Process:-

1. Enable USB Debugging in your device.

2. Switch off your Samsung Galaxy Note 3 N900P

3. Open the Device to Download Mode. (To do this Press and hold Volume Down + Power Button)

4. After 2 Second WARNING! Screen appears. then Press Volume UP Button to enter Download Mode. 

5. Now Connect your Samsung Galaxy Note 3 N900P in your PC Through USB Cable.

6. Run the ODIN Application.

7. The ID:COM box of ODIN Screen will turn "Blue" with the COM port number so The Device is 

    Connected Successfully. & "Added" Should appear in the message ox in ODIN 8. Now from the ODIN Application screen Click the PDA button and select Download Root Package

9. Tick only Auto Reboot and F.Reset Time Check boxes are Selected in ODIN Screen.

10. Now Check again all the Step 1 to 9 then apply next step. 

11. Now Click the "Start Button" from the ODIN application and wait for some time to flash the file. 

12. Wait Some Time to Finishes this Process. After Finishes this Process than the ID:COM Section is Turned "Green"  with the Messages "Pass"

13. After Getting "Pass" Message Disconnect your Mobile To PC

14. Now your  Samsung Galaxy Note 3 N900P successfully Rooted. 

Installing TWRP Recovery Process:-

1. Enable USB Debugging in your device.

2. Switch off your Samsung Galaxy Note 3 N900P

3. Open the Device to Download Mode. (To do this Press and hold Volume Down + Power Button)

4. After 2 Second WARNING! Screen appears. then Press Volume UP Button to enter Download Mode. 

5. Now Connect your Samsung Galaxy Note 3 N900P in your PC Through USB Cable.

6. Run the ODIN Application.

7. The ID:COM box of ODIN Screen will turn "Blue" with the COM port number so The Device is 

    Connected Successfully. & "Added" Should appear in the message ox in ODIN 8. Now from the ODIN
    Application screen Click the PDA button and select TWRP Recovery file.

9. Tick only Auto Reboot and F.Reset Time Check boxes are Selected in ODIN Screen.

10. Now Check again all the Step 1 to 9 then apply next step. 

11. Now Click the "Start Button" from the ODIN application and wait for some time to flash the file. 

12. Wait Some Time to Finishes this Process. After Finishes this Process than the ID:COM Section is Turned "Green"  with the Messages "Pass"

13. After Getting "Pass" Message Disconnect your Mobile To PC

14. Now your  Samsung Galaxy Note 3 N900P successfully Install TWRP Recovery.
Enjoy your Samsung Galaxy Note 3 N900P successfully Rooted and Install TWRP Recovery.
Share this links with your friends
Don't used this process to other devices other wise your mobile is damage.
Note:- I am not responsible if you make any mistake and damage or any other problem your devise.