How to Root Samsung Galaxy Tab 2 10.1 P5100.

Requirements:-

1. USB cable.

2. Charging Your battery up 80%.

3. Samsung Galaxy Tab 2 10.1 P5100 Driver. Click here to Download

4. CF-Auto-Root-espressor:- Click Here to Download

5. Samsung ODIN V 3.07, Click here to Download. 
Rooting Process:-
1. Enable USB Debugging in your device.

2. Switch OFF your Samsung Galaxy Tab 2 10.1 P5100.

3. Open the device to Download mode. (To do this Press and hold power button + volume Down

    button. Download screen should appear.)

4. After 2 second WARNING! Screen appears. Press the 'VOLUME UP' button to enter Download 

    Mode. Now connect your Samsung Galaxy Tab 2 10.1 P5100.. in your PC through USB Cable.  

5. Run the ODIN application on the desktop. When the device is connected successfully, the ID: COM

    boxof ODIN screen will turn Blue or Yellow with the COM port number. & 'Added' should appear in

    the message box in Odin.(If not, then install  Samsung Galaxy Tab 2 10.1 P5100. USB driver 

    successfully then check it again.) (Other wise don't apply next step)

6. Now from the ODIN Application screen Click the PDA button and select CF-Auto-Root

7. Tick only Auto Reboot and F.Reset Time checkboxes are selected in ODIN Screen.
8. Now Click the Start Button from the ODIN application and wait for some time to flash the file.
9. Wait Until Process Finishes. As Soon As Process Done, You will See That The ID:COM Section is
    Turned Green With The Message “Pass”.
10. After Getting “Pass” Message, Disconnect Your Phone From The PC.
11. Now your  Samsung Galaxy Tab 2 10.1 P5100. successfully Rooted.
Enjoy your Samsung Galaxy Tab 2 10.1 P5100. successfully Rooted.
Share this links with your friends
Don't used this process to other devices other wise your mobile is damage.
Note:- I am not responsible if you make any mistake and damage or any other problem your devise.