Requirements:-
1. USB cable.
2. Charging Your battery up 80%.
3. Samsung Galaxy Tab 2 10.1 P5100 Driver. Click here to Download
4. CWM Recovery:-A. CWM package for GT-P5110.tar
5. Samsung ODIN V 3.07:- Click here to Download.
6. Samsung Galaxy Tab 2 10.1 USB Driver:- Samsung USB Drivers
CWM Recovery Installing Process:-
1. Enable USB Debugging in your device.
6. Now from the ODIN Application screen Click the PDA button and select CWM package for
2. Switch OFF your Samsung Galaxy Tab2 10.1
3. Open the device to Download mode. (To do this Press and hold Volume Down + Power. Download
screen should appear.)
4. After 2 second WARNING! Screen appears. Press the 'Volume UP' button to enter Download
Mode. Now connect your Samsung Galaxy Tab2 10.1. in your PC through USB Cable.
5. Run the ODIN application on the desktop. When the device is connected
successfully, the ID: COM
boxof ODIN screen will turn Blue or Yellow with the COM
port number. & 'Added' should appear in the
message box in Odin.(If not, then install Samsung Galaxy Tab2 10.1 USB driver successfully then check
it again.) (Other wise don't apply next step)
GT-P5110.tar
7. Tick only Auto Reboot and F.Reset Time checkboxes are selected in ODIN Screen.
8. Now Click the Start Button from the ODIN application and wait for some time to flash the file.
9. Wait Until Process Finishes. As Soon As Process Done, You will See That The ID:COM Section is
Turned Green With The Message “Pass”.
10. After Getting “Pass” Message, Disconnect Your Phone From The PC.
11. Now your Samsung Galaxy Tab2 10.1 successfully Install CWM Recovery
Enjoy your Samsung Galaxy Tab2 10.1 successfully Install CWM Recovery.
Share this links with your friends
Don't used this process to other devices other wise your mobile is damage.
Note:- I am not responsible if you make any mistake and damage or any other problem your devise.
7. Tick only Auto Reboot and F.Reset Time checkboxes are selected in ODIN Screen.
8. Now Click the Start Button from the ODIN application and wait for some time to flash the file.
9. Wait Until Process Finishes. As Soon As Process Done, You will See That The ID:COM Section is
Turned Green With The Message “Pass”.
10. After Getting “Pass” Message, Disconnect Your Phone From The PC.
11. Now your Samsung Galaxy Tab2 10.1 successfully Install CWM Recovery
Enjoy your Samsung Galaxy Tab2 10.1 successfully Install CWM Recovery.
Share this links with your friends
Don't used this process to other devices other wise your mobile is damage.
Note:- I am not responsible if you make any mistake and damage or any other problem your devise.
0 Response to "How to Install CWM Recovery in Samsung Galaxy Tab2 10.1 "
Post a Comment