How to Install CWM Recovery in Samsung Galaxy Mega 6.3 I9200/I9205.

Requirement:-
1. Charge your devices up to 80%.
2. Enable USB Debugging in your device.
3. Samsung Galaxy Mega 6.3 USB Driver. Click here to Download
4. Samsung ODIN V 3.07, Click here to Download. 
5. CWM Recovery File:- Click Here to Download

Installation Process

1. Enable USB Debugging in your device.

2. Switch OFF your Samsung Galaxy Mega 6.3 I9200/I9205.

3. Open the device to Download mode. (To do this Press and hold home button+power button + volume

    down button. Download screen should appear.)

4. After 2 second WARNING! Screen appears. Press the 'VOLUME UP' button to enter Download 

    Mode. Now connect your Samsung Galaxy Mega 6.3 I9200/I9205. in your PC through USB  

    Cable.  

5. Run the ODIN application on the desktop. When the device is connected successfully, the ID: COM

    boxof ODIN screen will turn Blue or Yellow with the COM port number. & 'Added' should appear in the

    message box in Odin.(If not, then install Samsung Galaxy Mega 6.3 I9200/I9205 USB driver successfully

    then check it again.) (Other wise don't apply next step)

6. Now from the ODIN Application screen Click the PDA button and select CWM Recovery File.tar

7. Tick only Auto Reboot and F.Reset Time checkboxes are selected in ODIN Screen.
8. Now Click the Start Button from the ODIN application and wait for some time to flash the file.
9. Wait Until Process Finishes. As Soon As Process Done, You will See That The ID:COM Section is
    Turned Green With The Message “Pass”.
10. After Getting “Pass” Message, Disconnect Your Phone From The PC.
11. Now your Samsung Galaxy Mega 6.3 I9200/I9205 successfully Install CWM touch_I9082 chotu.tar.zip
Enjoy Your Samsung Galaxy Mega 6.3 I9200/I9205 Successfully Install CWM Recovery.
Share this links with your friends.
Note:- I am not responsible if you make any mistake and damage or any other problem your device.