How to Use Windows Phone Image Designer Tools.

Windows Phone Image Designer Tool is Used to Flash Stock Firmware on your Windows Phone. On this page I have to provide instruction how to use Rockchip Factory Tool to flash official stock Firmware on your Rockchip based smartphone and Table. 

This Tools is work only Windows 8 and Windows 10 Phone Only.

1.       Download Windows Phone Image Designer Tool on Your Computer.

2.      Extract Windows Phone Image Designer Tool on your computer. See the following screen.

3.      Open the Driver Folder and run installsimpleio.bat file on your Computer.

4.      Now Connect your Windows Phone to the Computer. [With Original USB Cable]

5.      Now, Open Windows Phone Image Designer Tool [if you are using Windows 32 bit OS then Open Windows Phone Image Designer Tool > 32 > ImageDesigner > start.bat file. [OR] if you are using Windows 64 bit OS then Open Windows Phone Image Designer Tool > 64 > ImageDesigner > start.bat file

6.      After launched Windows Phone Image Designer Tool you will be able to see the following screen.

7.      Now, Select Flash a Windows Phone image onto your phone Option and Click on Next Button.

8.     Now, Click on Change Option.

9.      Now, Select Stock Firmware that you want to flash on your Windows Phone. [.ffu file]

10.  After you have to successfully added the stock Firmware on Windows Phone Image Designer Tool. Now Click on Flash Button to Start Flashing Process.

11.  Now, Wait 5 -10 Minutes to Complete this Flashing Process.

12.  After Successfully Completed Flashing Process you will be able to see the Congratulations! Your Device has been successfully flashed with the image you selected Message.

13.  Now, Disconnect your Device from the computer and Reboot it. After Rebooting the device you are ready to use it normally.