How to Use eMMC DL Tool.

eMMC DL Tool is a small application tools that allows you to Flash or Write Stock Firmware on your Qualcomm Device Smartphone and Tablet. eMMC DL Tool is works on Windows XP, Windows Vista, Windows 7, Windows 8, Windows 8.1 and Windows 10. On this page I have to give you provide all the step how to use eMMC DL Tool.

1.       Download and Extract eMMC DL Tool on Your Computer. After Extracting eMMC DL Tool you will be able to see the following Screen.

2.      First Install USB Driver on your Computer. If you have to all ready install this driver on your computer then skip this step.

3.      Switch Off your Device.

4.      Download the Stock Rom that you want to flash on your Android smartphone and Tablet.

5.      Now, open eMMC DL Tool on your Computer.

6.      After launched eMMC DL Tool you will be able to see the following screen.

7.      Now, Click on […] Button on eMMC DL Tool and select the Stock Firmware Folder.

8.     After you have to successfully added the stock Firmware Folder on eMMC DL Tool.

9.      Now, Connect your Android Device to the Computer [make sure Press and hold  Power Button and the Volume UP and Down button at the same time, Connect the device to the computer at the same time with original USB cable.

10.  One you have to successfully added the Android Device to the computer the Right Click on Computer > Manage > Device Manager.

11.   In Device Manager, Under the Ports section you will be able to see following the Port Number of your Android Device [Write down the Port Number]

12.  Now, in eMMC DL Tool you can setup the Port Number.

13.  Now, To Start the Flashing Click on the DL1 Button.

14.  Now, eMMC DL Tool will start Flashing Stock Firmware on your Android Device.

15.   After Complete this Flashing Process, you will be able to see the Green Pass massage on your screen.

16.  Now Close eMMC DL Tool and Disconnect your Android Device to the Computer.