Install Official XXLPF Android 4.1.2 Jelly Bean for Samsung Galaxy S Advance I9070P

Requirement:-
1. Charge your devices up to 80%.
2. Enable USB Debugging in your device.
3. Download & Install Samsung Galaxy S Advance I9070P Driver. Click here to Download 

4. Samsung ODIN V 3.07, Click here to Download. 

5. Official Jelly Bean :- Click Here to Download

Installation Process:-

1. Enable USB Debugging in your device.

2. Switch OFF your Samsung Galaxy S Advance I9070P

3. Open the device to Download mode. (To do this Press and hold volume down Button + power button

    + Home Button .  Download screen should appear.)

4. After 2 second WARNING! Screen appears. Press the 'Volume UP' button to enter Download 

    Mode. Now connect your Samsung Galaxy S Advance I9070P in your PC through USB Cable.  

5. Run the ODIN application on the desktop. When the device is connected successfully, the ID: COM

    boxof ODIN screen will turn Blue or Yellow with the COM port number. & 'Added' should appear in

    the message box in Odin.(If not, then install  Samsung Galaxy Tab-3 USB driver successfully

    then check it again.) (Other wise don't apply next step)

6. Now from the ODIN Application screen
      A. Click the PDA button and select .tar or .md5
      B. Click on ‘Phone’ then choose file with ‘MODEM’ in its name. If the file doesn't exist, ignore this step.
      C. Click on ‘CSC’ then choose file with CSC’ in its name. If this file doesn't exist, ignore this step.
      D. Click on ‘PIT’ then choose file with .pit file.However if this file doesn't exist, then ignore this one.

7. Tick only Auto Reboot and F.Reset Time checkboxes are selected in ODIN Screen.
    Tick Re-Partition option, only if the .PIT file is selected in the step 6.(If .PIT file select then tick
    Re-Partition other wise don't Tick Re-Partition box.
   Verify everything suggested in Step 6 and Step 7 is done correctly.
8. Now Click the Start Button from the ODIN application and wait for some time to flash the file.
9. Wait Until Process Finishes. As Soon As Process Done, You will See That The ID:COM Section is
    Turned Green With The Message “Pass”.
10. After Getting “Pass” Message, Disconnect Your Phone From The PC.
11. Now your  Samsung Galaxy S Advance I9070P successfully Update Jelly Bean 4.1.2

Enjoy your Samsung Galaxy S Advance I9070P successfully Update Jelly Bean 4.1.2
Share this links with your friends
Don't used this process to other devices other wise your mobile is damage.
Note:- I am not responsible if you make any mistake and damage or any other problem your devise.