How to Install CWM Recovery in Samsung Galaxy Ace Plus S7500

Requirement Files:-
1. Charge your devices up to 80%.
2. Enable USB Debugging in your device.
3. Download USB Driver for Samsung Galaxy Ace Plus:- Click Here to Download
4. Download CWM Recovery File:- Click Here to Download
5. Samsung ODIN V 3.07, Click here to Download.
Process to Install CWM:-
1. Enable USB Debugging in your device.

2. Switch OFF your Samsung Galaxy Ace Plus S7500

3. Open the device to Download mode. (To do this Press and hold volume Down + Power + Home

    buttons. Download screen should appear.)

4. After 2 second WARNING! Screen appears. Press the 'Volume UP' button to enter Download 

    Mode. Now connect your Samsung Galaxy Ace Plus S7500. in your PC through USB Cable.  

5. Run the ODIN application on the desktop. When the device is connected successfully, the ID: COM

    boxof ODIN screen will turn Blue or Yellow with the COM port number. & 'Added' should appear in the

    message box in Odin.(If not, then install  Samsung Galaxy Ace Plus S7500 USB driver successfully then 

    check it again.) (Other wise don't apply next step)

6. Now from the ODIN Application screen Click the PDA button and select clockworkmod 
    5.0.2.8.tar.md5

7. Tick only Auto Reboot and F.Reset Time checkboxes are selected in ODIN Screen.
8. Now Click the Start Button from the ODIN application and wait for some time to flash the file.
9. Wait Until Process Finishes. As Soon As Process Done, You will See That The ID:COM Section is
    Turned Green With The Message “Pass”.
10. After Getting “Pass” Message, Disconnect Your Phone From The PC.
11. Now your  Samsung Galaxy Ace Plus S7500 successfully Install CWM Recovery.
Enjoy your Samsung Galaxy Ace Plus S7500 successfully Install CWM Recovery.
Share this links with your friends
Don't used this process to other devices other wise your mobile is damage.
Note:- I am not responsible if you make any mistake and damage or any other problem your devise.