How to Update Samsung Galaxy Tab 2 7.0 P3100 with Android 4.2.2 XXDMG6 Jelly Bean Official Firmware

Samsung have finally launched the Android 4.2.2 Jelly Bean update for the Galaxy Tab 2. But with this news there is another new which will definitely make the Tab 2 owners sad that this was the last major update for the Tab 2. Hey itka not still over! There are many developers which will work for further updates. You can also install the latest official Android 4.2.2 stock rom on your Samsung Galaxy Tab 2 GT-P3100 by our simple guide.

Requirement:-

 

 1. Charge your devices up to 80%.
2. Enable USB Debugging in your device.
3. Download & Install Samsung Galaxy Tab 2 7.0 P3100 Driver. Click here to Download
4. Samsung ODIN V 3.07, Click here to Download. 

5. Android 4.2.2 XXDMG6 Jelly Bean Official Firmware:- Click Here to Download

Update Process:- 

1. Enable USB Debugging in your device.

2. Switch OFF your Samsung Galaxy Tab 2 7.0 P3100

3. Open the device to Download mode. (To do this Press and hold power button + volume down  

    button.  Download screen should appear.)

4. After 2 second WARNING! Screen appears. Press the 'VOLUME UP' button to enter Download 

    Mode. Now connect your Samsung Galaxy Tab 2 7.0 P3100. in your PC through USB Cable.  

5. Run the ODIN application on the desktop. When the device is connected successfully, the ID: COM

    boxof ODIN screen will turn Blue or Yellow with the COM port number. & 'Added' should appear in the

    message box in Odin.(If not, then install  Samsung Galaxy Tab 2 7.0 P3100 USB driver successfully then

    check it again.) (Other wise don't apply next step)

6. Now from the ODIN Application screen
      A. Click the PDA button and select .tar or .md5
      B. Click on ‘Phone’ then choose file with ‘MODEM’ in its name. If the file doesn't exist, ignore this step.
      C. Click on ‘CSC’ then choose file with CSC’ in its name. If this file doesn't exist, ignore this step.
      D. Click on ‘PIT’ then choose file with .pit file.However if this file doesn't exist, then ignore this one.

7. Tick only Auto Reboot and F.Reset Time checkboxes are selected in ODIN Screen.
    Tick Re-Partition option, only if the .PIT file is selected in the step 6.(If .PIT file select then tick
    Re-Partition other wise don't Tick Re-Partition box.
8. Now Click the Start Button from the ODIN application and wait for some time to flash the file.
9. Wait Until Process Finishes. As Soon As Process Done, You will See That The ID:COM Section is
    Turned Green With The Message “Pass”.
10. After Getting “Pass” Message, Disconnect Your Phone From The PC.
11. Now your  Samsung Galaxy Tab 2 7.0 P3100 successfully Update Jelly Bean 4.2.2

Enjoy your Samsung Galaxy Tab 2 7.0 P3100 successfully Update Jelly Bean 4.2.2
Share this links with your friends

Don't used this process to other devices other wise your mobile is damage.

Note:- I am not responsible if you make any mistake and damage or any other problem your devise.