How to install CWM Recovery in Samsung Galaxy Note-2

Samsung Galaxy Note 2 is the second phablet manufactured by the South Korea-based company.The 5.5-inch phable,1.6 Ghz quad-core Cortex A9 GPU and Mali 400MP GPU.5.5-inch HD Super AMOLED display with resolution of 720 x 1,280p,aspect ratio of 16:9,2 GB of RAM and 16/32/64 GB of internal storage.Bluetooth 4.0, NFC, 3G and 4G LTE, microUSB 2.0, and 3.5 mm audio jack for the Samsung Galaxy Note 2,8 megapixel sensor with autofocus, LED flash,full HD video recording capabilities,Android 4.1 Jelly Bea,
Requirement:-
1. Charge your devices up to 80%.
2. Enable USB Debugging in your device.
3. Download & Install Samsung Galaxy Note-2 Driver. Click here to Download
4. Samsung ODIN V 3.07, Click here to Download. 
5. Download CWM Recovery File:- Click Here to Download
Step to Rooted on  Samsung Galaxy Note-2 :-
1. Enable USB Debugging in your device.
2. Switch OFF your Samsung Galaxy Note-2.
3. Open the device to Download mode. (To do this Press and hold home button+power button + volume
    down button. Download screen should appear.)
4. After 2 second WARNING! Screen appears. Press the 'VOLUME UP' button to enter Download 
    Mode. Now connect your Samsung Galaxy Note-2. in your PC through USB Cable.  
5. Run the ODIN application on the desktop. When the device is connected successfully, the ID: COM
    boxof ODIN screen will turn Blue or Yellow with the COM port number. & 'Added' should appear in the
    message box in Odin.(If not, then install  Samsung Galaxy Note-2 USB driver successfully
    then check it again.) (Other wise don't apply next step)
6. Now from the ODIN Application screen Click the PDA button and select ClockworkMod (CWM)
    Recovery file that you 
7. Tick only Auto Reboot and F.Reset Time checkboxes are selected in ODIN Screen. After that Click
     the Start Button and wait for some time to install the recovery on your device,
8. Wait Until Process Finishes. As Soon As Process Done, You will See That The ID:COM Section is
    Turned Green With The Message “Pass”
9. After Getting “Pass” Message, Disconnect Your Phone From The PC
10. Now Again turn off your device, Press and hold home button, power button and volume down button.
     Phone will boot into recovery. When you exit recovery, it will ask if you want to root the device.
     Select yes

Enjoy Your  Samsung Galaxy Note-2 Successfully Install CWM Recovery..
Share this links with your friends.
Note:- I am not responsible if you make any mistake and damage or any other problem your device.

0 Response to "How to install CWM Recovery in Samsung Galaxy Note-2"

Post a Comment